Seestrasse 39
Zurich, CH, 8700
Tel:+41 44 390 25 75
2015 Pttara Yachts
Design & production of Motor Yacht “Pttara” has been done by certain experienced in-house teams of the shipyard. From the preliminary design stage until the current condition, each step has been achieved by computer aided design and production methods. (CAD + CAM). Therefore, the 3D design advantages have also been added to the production at any stage.
At creating stage, main request from this yacht was having a sleek & modern viewed boat with large & fresh interior. Its length kept as 42.5 m (140’) to be able to provide a boat, big enough to sail on the open seas & oceans and compact enough to anchor at the small bays of Mediterranean. Finally, the profile resulted successfully with its sleek and contemporary look. Therefore, to fulfill the fresh interior request; size of the salons & cabins kept very big and bright, within illusion of very wide windows.
Production stages have also been achieved carefully and well planned. As a critical path, during the block erection stages, the certified welders have followed the ‘welding sequence’ rules strictly to avoid deformation from the hull & superstructure surfaces. Ultimately, on the boat, all these surfaces have been well faired; so it has been managed to reduce the duration & cost of cosmetic paint finishing (filler application & painting).
Specifications
Engine 1 Specifications
Engine 2 Specifications
Media Gallery
12 guests in 5 staterooms:
Master Cabin (on Main Deck)
2 VIP Cab ins, two persons in each cabin (on Lower Deck aft)
2 Twin Guest Cabins, three persons in each cabin (on Lower Deck midship)
7 crew in 4 cabins:
3 Crew Cabins, two persons in each cabin (on Lower Deck fore)
Captain’s Cabin (on Upper Deck midship portside, behind the wheel house)
Life rafts: 2 x SOLAS B Pack, 16 people
Life jackets: 25 Adult, 5 Children
Fire, Smoke, Gas Intruder alarms: Custom made
Bilge & fire pumps: Gianneschi Pumps
Searchlight: 2
Security cameras: Central monitoring system for decks, interior & engine room
Bow thruster: Hydraulically Driven, 75 HP
Water maker: 2 x Idromar 10,000 lt approx. daily production
Stabilizers: 2 x Fin Stabilizer System, Underway
Fuel separator: Alfa Laval, 760 lt/h
Air-conditioning: 360,000 BTU with Fresh Air Supply
Waste water treatment: Hamann AG
Custom made Toilet system: EVAC
Boilers: Gianneschi Boilers
Anchors & chain: 2 x HHP Pool Anchor Total Weight 315 kg Custom Made & 2 x 137.5 m Stud Link ø16 mm
Chain Windlass: 2 x DATA, Capacity 5000 kg
Passarelle: Custom Made, Stainless Steel & Teak
Stern capstans: 2 x DATA, Capacity 1800 kg
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.